Serving the Salinas area  ·  (831) 484-7891  ·  Open Mon-Sun 7am-7pm
📞 (831) 484-7891 Free Quote

Metal Roofing in Seaside, CA (93955) · Local Professionals

Salinas Metal Roofing · Fast response in Seaside and the Salinas area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+267Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Seaside's older cottages and mid-century homes sit close to Monterey Bay, where cool fog and salt air work on roofs year round. If your place is near Fremont Boulevard or down by Del Monte Beach, you already know how fast a small leak can turn into a bigger problem.

Homeowners in Seaside (93955) call Salinas Metal Roofing because we understand this coastal climate. From the fog belt near Laguna Grande Park to the sunnier lots up by Highland Street, we handle metal roof replacement and leak repair that actually holds up.

Metal Roofing in Seaside (93955)

Seaside is a mix of tight lots, older cottages, and mid-century ranches, many with low-pitch roofs and mature trees. The marine layer keeps things damp, and salt air near the beach eats at fasteners and flashing. We see a lot of failed seals and corrosion on roofs within a mile of the water. Access can be tricky on narrow streets off Broadway Avenue, and we plan for that before we start.

Our team has worked across Seaside and the Salinas area for years, from small repairs to full replacements. We know which profiles and materials stand up to the coastal fog and which ones you will be fixing again in five years.

Our services in Seaside

How a Job Works in Seaside

Step 1: Call us at (831) 484-7891 or request a free on-site assessment. We will inspect your roof, check the attic if needed, and give you a straight answer on repair versus replacement.

Step 2: Once you approve the estimate, we handle the work. In Seaside, that often means coordinating with the city on permits for a full re-roof and working around tight driveway access. We protect your landscaping and keep the site secure each day.

Step 3: We clean up completely, haul away old materials, and walk the finished roof with you. You will know exactly what was done and how to care for it.

Pricing in Seaside depends on the size and pitch of your roof, access, and condition. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. Leak repairs start at $450, and screw replacement and re-fastening starts at $750. Coating and painting starts at $2.50 per square foot. For a free estimate tailored to your Seaside property, call (831) 484-7891.

My cottage near Del Monte Beach has rusted fasteners and a leak. Can you fix it without a full replacement?
Yes, in many cases. Salt air near the beach corrodes fasteners and washers, which is a common source of leaks. We can replace the screws, re-seal the penetrations, and repair any flashing. If the panels themselves are compromised, we will tell you honestly and give you options.
A storm just lifted some panels on my roof in Seaside. How fast can you respond?
We offer free inspections for storm and wind damage and prioritize active leaks. Call (831) 484-7891 and we will schedule a visit as soon as possible. We can often make temporary repairs the same day to prevent further water damage.
What does a typical metal roof replacement cost in Seaside?
Most full replacements in Seaside run between $9 and $14 per square foot depending on the material, roof complexity, and whether we remove the old roof. A 1,500 square foot roof might land in the $13,000 to $21,000 range. We provide a free estimate so you know before you commit.
Do I need a permit for a metal roof replacement in Seaside?
Yes, the City of Seaside typically requires a permit for a full re-roof. Requirements vary, so we always confirm with the local building department before starting. We handle the paperwork and inspections as part of the job.
My HOA has rules about roof color. Can you help with approval?
We can provide material samples and documentation for your HOA submission. Many Seaside HOAs require specific colors or profiles, and we will work within those rules. We can also help with property line questions if a neighbor's tree or structure is involved.
Are you fully insured for work at my Seaside home?
Yes. Salinas Metal Roofing carries general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Seaside?
Because of the coastal fog and salt air, we recommend an inspection every two to three years, and after any major storm. Checking fasteners and flashing early prevents small issues from becoming leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Salinas

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salinas

All your work handled by qualified professionals in Salinas

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

267+ Verified Client Reviews in Salinas

⭐⭐⭐⭐⭐ 4.9/5 · 267 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salinas · Response within 24h · No commitment · ☎ (831) 484-7891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salinas ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm