Serving the Salinas area  ·  (831) 484-7891  ·  Open Mon-Sun 7am-7pm
📞 (831) 484-7891 Free Quote

Metal Roofing in Boronda, CA (93906) · Local Professionals

Salinas Metal Roofing · Fast response in Boronda and the Salinas area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+267Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Boronda is that cluster of newer stucco subdivisions just north of Salinas, where the valley wind hits those big shingle roof planes hard. If you live off Boronda Road or near the 101 interchange, you already know how fast a cheap shingle roof can start lifting at the edges.

We are Salinas Metal Roofing, and we have been replacing and repairing roofs in 93906 for years. Homeowners call us because we know the difference between a Boronda wind problem and a Salinas Valley sun problem, and we show up ready to fix it right.

Metal Roofing in Boronda (93906)

Boronda sits on the flat valley floor north of Salinas, and most of the housing stock here is 1980s to 2020s stucco subdivision homes with large shingle roof planes. The afternoon northwest wind funnels straight up the valley and hits those roofs broadside, which is why we see so many lifted shingles, failed fasteners, and wind-driven leaks in this ZIP code. Lots are tight, fences are close, and many homes have low-pitch sections over garages and additions that catch water at the seams. We also work on the older farmhouses and outbuildings that still exist on the edges of Boronda, where corrugated and R-panel metal roofs are common and need real maintenance, not just a patch.

Our team has installed standing seam, metal shingle, and stone-coated steel roofs all over Boronda and the surrounding Salinas area. We know how to stage materials on a narrow driveway, how to protect your neighbor's fence line, and how to get a metal roof that actually sheds the wind instead of catching it.

Our services in Boronda

How a Job Works in Boronda

Step 1: you call us at (831) 484-7891 and we set up a free on-site assessment. We walk the roof, check the attic if you have one, look at the fasteners and flashing, and give you a straight answer about repair versus replacement. No pressure and no sales pitch.

Step 2: once you approve the scope, we handle the work. In Boronda that often means coordinating with your HOA on panel profile and color, pulling the roofing permit through the city, and scheduling around the wind. We typically start early because the afternoon gusts make panel handling harder and less safe. We keep the job site organized and protect your landscaping and driveway.

Step 3: we clean up every day and do a final walkthrough with you. We make sure the gutters are clear, the magnetic sweep has picked up screws, and you know exactly what was done. We leave your property clean and we stand behind the work.

Pricing in Boronda depends on the size and pitch of your roof, how many layers are already there, and how easy it is to access. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Metal shingle and stone-coated steel both start around $9 per square foot. Repairs and leak fixes start around $450, screw replacement and re-fastening starts around $750, and flashing or skylight repair starts around $600. We give free estimates, so call (831) 484-7891 and we will look at your specific roof and give you a real number.

My shingles keep lifting on the windward side of my roof in Boronda. Is metal a better choice?
Yes, and we see this constantly in the subdivisions off Boronda Road. Shingles rely on adhesive strips and gravity, and the valley wind here is strong enough to break those seals over time. A standing seam or metal shingle roof handles wind much better because the panels are mechanically fastened and the seams interlock. We can inspect your roof and tell you whether a repair or a full replacement makes more sense.
A storm just peeled back part of my metal roof in Boronda. How fast can you get out?
Call us at (831) 484-7891. We prioritize storm and wind damage calls in Boronda and the surrounding Salinas area. We will get out to inspect and secure the roof as quickly as we can, and we document the damage for your insurance claim if you are filing one. We never promise coverage, but we do provide the photos and paperwork you need.
What does a typical metal roof replacement cost for a Boronda subdivision home?
Most homes in Boronda are single-story or two-story stucco with fairly simple roof lines, so a replacement often falls in the range of $9 to $14 per square foot depending on the material and whether we are removing the old shingles. A 1,500 square foot roof might land around $13,500 to $21,000. We give free estimates and we will break down the numbers so you can compare options.
Do I need a permit to replace my roof in Boronda?
In most cases yes, a roofing permit is required for a full replacement or re-roof, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection. We always defer to the local building department for the final word on what your specific project needs, and we will tell you what to expect before we start.
My HOA in Boronda has design rules. Can you help with approval?
Yes. Many Boronda subdivisions have HOA design review that restricts panel profile and color. We can provide product samples, spec sheets, and color charts for your submittal, and we will work with your HOA point of contact so the approval process does not hold up the job. If there is a property line question with a neighbor, we keep our staging and work inside your lot lines and follow the setback rules.
Are you insured for work on my Boronda property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Boronda between storms?
Have the roof inspected once a year, ideally in late summer before the rainy season. We check fasteners, seams, and flashing, clear debris from the gutters, and look for any wind damage. In Boronda the wind is the main culprit, so catching a loose fastener early saves you from a leak later. We offer free estimates for inspections, so call (831) 484-7891 to schedule one.
Why choose us?

Trusted professionals in Salinas

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Salinas

All your work handled by qualified professionals in Salinas

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

267+ Verified Client Reviews in Salinas

⭐⭐⭐⭐⭐ 4.9/5 · 267 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Salinas · Response within 24h · No commitment · ☎ (831) 484-7891

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Salinas ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm