Licensed & Insured, in Salinas and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Salinas
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (831) 484-7891 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Salinas and surrounding areas · On-site visits included · Free estimate within 24h
Salinas Metal Roofing is a team of local certified professionals based in Salinas. We respond quickly in Salinas and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (831) 484-7891⭐⭐⭐⭐⭐ 4.9/5 · 267 verified Google reviews
“We needed a metal roof for our new hay barn out on the east side and these guys knocked it out in about four days with a crew of five. The corrugated panels went up straight and the whole thing handles the wind way better than I expected. Good honest work.”
Agricultural Metal Roofing
“Our old Victorian had a wraparound porch with a beat-up shingle roof and I was dreading the mess of a full tear-off. They retrofitted standing seam right over the top instead, finished in two days, and you can't even tell there's old roofing underneath. My only gripe is they showed up a bit later than the window they gave me, but the work itself is beautiful.”
Metal Roof Over Shingles (Retrofit)
“Had them re-roof the big barn and equipment shed on our farm. Roughly 6,000 square feet of ribbed panel and they replaced a bunch of rusted-out fasteners while they were at it. Rain doesn't come through the loft anymore, which is a huge relief heading into winter.”
Commercial & Agricultural Metal Roofing
“Replaced our old leaky roof with a new metal one and couldn't be happier. The crew was respectful, cleaned up every last screw and scrap, and the house already feels cooler. Worth every penny.”
Metal Roof Replacement
“We had a persistent leak around the chimney flashing and one skylight that nobody could seem to fix. Salinas Metal Roofing found the actual problem in about twenty minutes and had it sealed up the same afternoon. Two heavy storms later and it's bone dry.”
Flashing & Skylight Repair
“Just had a new gray standing seam roof put on our house and it looks fantastic. They took the time to walk me through the color samples and the panel layout before ordering, and the finished job is super clean with straight lines everywhere. Neighbors have already asked for their number.”
Standing Seam Metal Roofing
“Solid install from start to finish. About 2,200 square feet of metal roofing on our place, done in three days, and the crew even hauled off the old materials. Pricing was fair and there were no surprise add-ons at the end.”
Metal Roof Installation
“We wanted the look of clay tile without the weight and cracking, and they set us up with stone-coated steel that honestly fools everyone who drives by. Installation took a little longer than quoted, but the crew kept us posted the whole way and the end result is gorgeous.”
Stone-Coated Steel RoofingReal photos of our work in Salinas · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel install | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and new flashing on a simple gable roof. |
| Standing seam install | Starting at $13/sq ft | Concealed clips and heavier gauge for high-wind exposure; pitch and valleys move the number. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes profile-matched panels and trim; historic or HOA design review adds coordination time. |
| Deck repair and re-flashing | On estimate | Soft sheathing, multiple chimneys, or dormers need an on-site look before we quote. |
| Travel | Included | in Salinas and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard gable | Starting at $10/sq ft | Includes panels, concealed clips, trim, and standard flashing on a straightforward pitch. |
| Standing seam, complex roof | Starting at $14/sq ft | Valleys, dormers, and multiple penetrations add labor and custom flashing detail. |
| Tear-off and redeck | On estimate | Removing old layers and replacing damaged sheathing needs an on-site look first. |
| Long-run farm or shop roof | On estimate | Panel length, staging, and access across the valley floor drive the final number. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Tear-off, deck inspection, underlayment and new corrugated or ribbed panels installed. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams, priced higher for the longer service life and cleaner look. |
| Stone-coated steel or metal shingle | Starting at $12/sq ft | Textured or stamped panels for HOA and historic look requirements, plus trim and flashing. |
| Deck repair and complex roof geometry | On estimate | Cut-up roofs, dormers, valleys and rotten sheathing need an on-site look before a number. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic retrofit over sound shingles | Starting at $7/sq ft | Exposed-fastener panel over existing shingles, includes slip sheet and standard trim. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed-fastener panels, higher wind rating and cleaner look; price rises with roof complexity. |
| Purlins or deck repair | Add $1 to $3/sq ft | Added when the deck sags or framing needs correction before panels go down. |
| Partial tear-off and retrofit | On estimate | Needed when a third shingle layer or rot forces a section to be stripped first. |
| Travel | Included | Covered in Salinas and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Roof walk, layer count and written scope within 24 hours at (831) 484-7891. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (flashing, small screw replacement) | Starting at $450 | Includes inspection, written scope, and repair of one or two isolated failure points with standard materials. |
| Screw replacement and re-fastening (residential) | Starting at $850 | Covers pulling and replacing backed-out or rusted screws with new washers across a section of roof. |
| Panel replacement (residential) | Starting at $1,200 | Includes removal and replacement of one or more damaged panels with matching profile and proper overlap. |
| Agricultural or commercial building repair | On estimate | Large roof area, high fastener count, and access conditions require an on-site look before pricing. |
| Travel | Included | in Salinas and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak trace and repair | Starting at $450 | Includes inspection, source tracing, and a straightforward fix such as fastener or flashing repair. |
| Fastener and washer replacement run | Starting at $650 | Covers pulling failed screws and installing new sealed fasteners along the affected panel run. |
| Flashing rebuild (wall, chimney, skylight) | Starting at $850 | Includes removing failed sealant and rebuilding the flashing detail with new metal and proper laps. |
| Emergency tarping during storm | Starting at $350 | Temporary weatherproofing to stop active water intrusion until permanent repair can be scheduled. |
| Complex or large-scale leak repair | On estimate | Multiple leaks, panel replacement, or difficult access need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (831) 484-7891, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard screw replacement | Starting at $750 | Covers pulling failed screws and installing new fasteners with UV-resistant washers on a typical single-story Salinas home. |
| Oversized re-fastening | Starting at $1,150 | For older corrugated and R-panel roofs with enlarged holes, using larger-diameter screws and fresh sealing washers. |
| Washer-only replacement | Starting at $650 | Replaces sun-baked washers on sound screws, best for roofs where fasteners are tight but seals have failed. |
| Edge and ridge re-fastening | Starting at $950 | Adds fasteners at eave, ridge and gable edges where the afternoon valley wind creates the strongest uplift. |
| Complex or large-scale job | On estimate | Barns, packing sheds, steep pitches and storm-damaged panels need an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (831) 484-7891, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple pitch | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and standard flashing on an accessible roof. |
| R-panel roof with tear-off | Starting at $7.00/sq ft | Includes old roof removal, deck inspection, underlayment, and new ribbed panels. |
| Roof with sheathing repair | Starting at $8.50/sq ft | Adds replacement of soft sheathing and purlin work before panels go down. |
| Complex or large agricultural roof | On estimate | Long spans, multiple penetrations, and access constraints need an on-site measurement first. |
| Travel | Included | in Salinas and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, single-story ranch | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and trim on good-access roofs. |
| Metal shingle roof, two-story with valleys | Starting at $12/sq ft | Higher labor and flashing detail on steep, cut-up roofs with skylights. |
| Over existing single shingle layer | Starting at $7/sq ft | Requires a sound single layer and code approval; no tear-off included. |
| Deck repair and flashing rebuild | On estimate | Soft decking, chimney, and skylight flashing priced after on-site inspection. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard flashing; roof size and pitch move the price |
| Retrofit over existing shingles | Starting at $7/sq ft | Installed over a sound single-layer roof where code allows; existing layer count is the main factor |
| Tile or shake profile upgrade | Starting at $10/sq ft | Premium profiles and colors cost more; HOA or historic district approval can add review time |
| Storm or wind damage repair | On estimate | Scope depends on panel damage, flashing condition and how much deck the leak reached |
| Travel | Included | in Salinas and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, dormer) | Starting at $20/sq ft | Includes soldered copper pans, underlayment, and labor; pitch and access move the price. |
| Zinc or aluminum accent roof | Starting at $18/sq ft | Includes concealed-fastener panels and flashing; metal choice and square footage set the final rate. |
| Custom copper flashing and chimney work | Starting at $1,200 | Includes shop-formed step and counter flashing; chimney size and roof access drive the number. |
| Full architectural copper or zinc roof | On estimate | Every pan is formed to the roof, so we measure the deck before quoting a number. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic reflective coating | Starting at $2.50/sq ft | Wash, rust spot treatment, and one reflective coat on a sound low-slope panel roof. |
| Full prep and two-coat system | Starting at $3.75/sq ft | Includes fastener check, seam seal, rust conversion, primer, and two finish coats. |
| Coating with screw replacement | Starting at $4.50/sq ft | Adds replacement of failed screws and washers across the full panel field. |
| Large agricultural or commercial roof | On estimate | Packing sheds and cold-storage roofs need an on-site look for access and staging. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney reflash | Starting at $600 | Covers removal of failed flashing, custom-bent saddle and counterflashing, and resealing at one chimney. |
| Skylight curb reseal or rebuild | Starting at $650 | Includes new curb flashing and UV-rated sealant; price rises if the curb or decking has rotted. |
| Valley or stucco transition repair | Starting at $700 | Custom-bent metal and step flashing at one valley or wall transition, priced by linear footage. |
| Multiple penetrations or complex roof | On estimate | Several chimneys, skylights, or dormers on a steep or multi-plane roof need an on-site look before pricing. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Perimeter re-fastening (residential) | Starting at $1,200 | Includes roof inspection, field pull-out testing, and replacement of fatigued fasteners at eaves and rakes. |
| Rail and edge hardware over entries | Starting at $1,450 | Adds rail sections and edge stops over steep entries, porches, and walkways; pitch and access drive the price. |
| Full uplift package (residential) | Starting at $2,400 | Combines perimeter fastening, edge hardware, and ridge and trim tie-down with documented pull-out testing. |
| Agricultural or commercial roof | On estimate | Large panel counts, high access, and loading-zone hardware require an on-site look before pricing. |
| Travel | Included | in Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (831) 484-7891, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation and a written repair versus replacement assessment, no obligation |
| Minor repair (screws, sealant, small flashing) | Starting at $350 | Covers backed-out screw replacement, resealing and small flashing repairs on accessible single-story roofs |
| Panel and flashing repair | Starting at $850 | Includes panel replacement, flashing rebuild at penetrations, and disposal, with height and access affecting price |
| Limb impact or multi-area storm damage | On estimate | Needs an on-site look to size panel replacement, deck inspection and insurance documentation scope |
| Travel | Included | In Salinas and surrounding valley communities, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (831) 484-7891, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walkover with photo report on fasteners, seams, flashing, and coating wear for a single-family home. |
| Pre-purchase or insurance documentation inspection | Starting at $250 | Written report with remaining service life and repair estimates, priced by roof size and penetration count. |
| Agricultural or commercial building inspection | On estimate | Large panel counts, steep pitches, and access safety require an on-site look before we quote a number. |
| Post-storm or wind damage assessment | Free estimate | Targeted check of uplift, fastener pull-out, and panel deformation, with photo documentation for your claim. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, fascia-mount | Starting at $9/linear ft | Includes on-site forming, hangers, and basic downspout; height and run length move the rate. |
| Seam-clamp system for standing seam | Starting at $14/linear ft | Non-penetrating clamps protect the panel warranty; seam spacing and roof pitch affect labor. |
| Debris guard and oversized downspouts | Starting at $6/linear ft add-on | Screened guard and larger outlets handle eucalyptus and oak leaf load on exposed runs. |
| Fascia or drip edge repair | On estimate | Soft wood or a failing edge needs an on-site look before we quote the repair scope. |
| Travel | Included | In Salinas and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written assessment | Free estimate | Full roof walk, fastener and flashing check, and a written scope with photos of every failure point |
| Re-fastening and seal repair | Starting at $850 | Screw replacement, closure strips, and lap sealant on sound panels, priced by roof area and access |
| Exposed-fastener R-panel installation | Starting at $4.50 per sq ft | New ribbed panels, fasteners, and closure strips, with price moving on pitch and purlin condition |
| Standing seam installation | Starting at $9.00 per sq ft | Concealed-fastener panels for leak-sensitive buildings, with cost driven by panel gauge and seam height |
| Complex or large-scale job | On estimate | Multi-building ag sites and cold storage need an on-site look at structure, insulation, and access |
| Travel | Included | in Salinas and surrounding valley areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (831) 484-7891, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Salinas usually want the same thing: a straight answer about whether their roof can be repaired or whether it is time to replace it. Salinas Metal Roofing is the local team to call for metal roof installation, replacement, re-roof, and repair. We work on the steep pitches, heavy tree cover, and high-exposure conditions found across the valley and foothills, and we know the large stock of aging screw-down roofs that dominate many properties here.
From the Victorian and Craftsman homes near Old Town Salinas and Central Salinas to the stucco subdivisions of North Salinas, Creekbridge, Westridge, and Boronda, and out to Spreckels, Castroville, and Prunedale, our network of licensed, insured local contractors handles the full range of metal roofing work. If you are tired of patching a failing roof, start with a metal roof inspection and get an honest read on what your roof actually needs.
Most metal roof leaks in Salinas trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Thermal movement works seams and closures loose over time, pipe boots and flashing at chimneys, skylights, and valleys fail at their sealant lines, and strong valley winds can lift or peel panels. Fallen limbs from eucalyptus, oaks, and cypress add punctures to the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time a stain shows up on your ceiling, rotted sheathing and saturated insulation may already be working. That is why we chase the source, not the stain, and why we tell you plainly when a targeted repair is the right call and when replacement makes more sense. Often, a full screw replacement with new fasteners and sealing washers restores a watertight roof for a fraction of replacement cost.
If you have an active leak or storm damage, call (831) 484-7891 to schedule service. Our team handles metal roof leak repair and screw replacement and re-fastening across the area, and we will give you a clear, no-pressure assessment of what your roof needs.
We install the full range of metal roofing systems and match the system to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for longevity and clean lines. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that varies by policy.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can give you a number based on your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and let the process work.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements, thresholds, fees, and inspections vary by city. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Salinas building or planning department before starting your project. For questions about your project, contact us.
Ready to get started? Salinas Metal Roofing serves in Salinas and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Salinas · Response within 24h · No commitment · ☎ (831) 484-7891
Your Free Quote Request